Product Status Discontinued on 9/7/2023

AC Unit for Wall Mount Network Racks - 2,000 BTU (0.6 kW), 120V

Name: SRCOOL2KWM
Brand: Eaton
SKU: 037332199928
Rating: 0 (0 reviews)

Part Number: SRCOOL2KWM

Product Datasheet

AC Unit for Wall Mount Network Racks - 2,000 BTU (0.6 kW), 120V

Part Number: SRCOOL2KWM

This Model has been retired and has not been replaced. An Owner's Manual and other information for the SRCOOL2KWM is available on the model support page

Similar Products

Important Note

The SRCOOL2KWM is recommended for wall-mount rack enclosures with ventilated doors and/or side panelsCooling air delivered to equipment is lessened in an open frame application. Condenser must be ducted.

Overview

The self-contained SRCOOL2KWM SmartRack® 120V Wall-Mount Rack Air Conditioner mounts to the top of your wall-mount rack enclosure and delivers 2,000 BTU of close-coupled cooling power to the equipment mounted within the cabinet. The space-saving, energy-efficient SRCOOL2KWM filters and dehumidifies air, then cools the air and directs it through the ventilated front door or side panel of the cabinet. This helps prevent shutdowns and other equipment failures caused by overheating.

Recommended for server rooms and other IT environments with limited floor space, the SRCOOL2KWM is more efficient than units that cool an entire room, because the magnetic air scoop attached to the front of the unit pushes the cool air directly toward your equipment. A built-in evaporator eliminates condensation, so no water collection tank or floor drain is required. No plumbing or special circuits are needed, so setup is quick and easy.

The 6-ft. (1.83 m) power cord with NEMA 5-15P plug connects to a standard 120V AC outlet. The SRCOOL2KWM restarts automatically after power failures. The user-friendly control panel lets you schedule unattended shutdowns and restarts, adjust the temperature and set other operating conditions.

Adding the optional SRCOOLNET2LX module (sold separately) turns the SRCOOL2KWM into a managed network device via web browser, NMS or telnet. It allows you to monitor and adjust temperature and humidity remotely, access activity logs and receive alerts via email, SMS or SNMP.

Features

Compact and Efficient Cooling of Rack Equipment

Mounts to most wall-mount rack enclosures with ventilated door or side panels
Close-coupled energy-saving cooling directed at equipment instead of whole room
Recommended for IT environments with limited floor space
2,000 BTU (0.6 kW) of cooling capacity
Prevents equipment shutdowns, malfunctions and failures caused by overheating and temperature fluctuations
Eco-friendly R134A refrigerant meets environmental standards

Convenient Operation

Magnetic front scoop directs cool air through rack's ventilated door or side panel to cool overheated rack equipment
Magnetic door panel prevents warm air from entering cabinet
Restarts automatically after power failures
Intuitive push-button control panel features LCD display and diagnostic LEDs
Operates at noise levels comparable to an average office setting
Temperature control 63-86 degF

Optional Remote Management

SRCOOLNET2LX accessory (sold separately) allows you to monitor temperature and humidity, receive alerts, review logs and control settings remotely via SNMP, web, SSH or telnet

Simple Installation

6-ft. (1.83 m) power cord with NEMA 5-15P plug attaches to standard AC outlet
Built-in evaporator eliminates condensation—no floor drain or water collection tank needed
Magnetic air scoop attaches to rack enclosure's front door to optimize airflow
Mounting hardware included

Package Includes

SRCOOL2KWM SmartRack Wall-Mount Server Rack Cooling Unit - 2,000 BTU, 120V
(2) Adjustable exhaust panels
Exhaust duct adapter
Directional output vent
Exhaust duct
Extra drainage plug
Magnetic door panel
(4) M6 x 16 screws
(8) M4 x 10 screws
(4) Self-tapping screws
Magnetic vinyl
Mounting brackets
Owner’s manual

Specifications

OVERVIEW

UPC Code

037332199928

INPUT

Electrical Consumption (Max)	276 Watts
Nominal Input Voltage(s) Supported	120V AC
Nominal Input Voltage Description	120V AC 60 Hz
Input Connection Type	NEMA 5-15P
Input Plug Features	NEMA 5-15P
Voltage Compatibility (VAC)	120
Input Frequency	60 Hz
Input Cord Length (ft.)	6

COOLING

Airflow	Evaporator = 78 CFM / Condenser = 130 CFM
Cooling Type	Active
Cooling Capacity (BTUs)	2000
Cooling Capacity (kW)	0.6
Refrigerant	R134A
Refrigerant Amount	7.76 oz.

USER INTERFACE, ALERTS & CONTROLS

Front Panel LCD Display	2-digit LCD displays numerical temperature readout
Front Panel LEDs	Push-button control panel with multiple LEDs for operational configuration

PHYSICAL

Color	Black
Material of Construction	Steel
Form Factors Supported	Wall Mount
Shipping Dimensions (hwd / in.)	16.90 x 19.60 x 23.60
Shipping Weight (lbs.)	53.00
Unit Dimensions (hwd / in.)	11.100 x 13.500 x 13.500
Unit Weight (lbs.)	35

COMMUNICATIONS

SNMP Compatibility

SRCOOLNET2 (Optional) remote management accessory for remote monitoring and control

FEATURES & SPECIFICATIONS

Compressor Type	Rotary
Dehumidifier	0.83 liters / hour
Sound Level (Noise)	< 55dB
Amp Draw Nominal	2.47A

STANDARDS & COMPLIANCE

Product Certifications	CAN/CSA-22.2 No. 117-1970 (Canada); NOM (Mexico); UL 484
Product Compliance	RoHS

WARRANTY & SUPPORT

Product Warranty Period (Worldwide)

1-year limited warranty

Questions & Answers

At what temperature should you operate a data center?

Excessive heat can damage servers, reducing the life of equipment and potentially causing an unexpected shutdown. Humidity problems can also accompany excessive heat. High humidity can cause condensation and lead to the accumulation of dust on components. Low humidity can cause electrostatic discharge (ESD).

For newer IT equipment, the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) recommends an operating temperature of 64°F to 81°F (18°C to 27°C), and a relative humidity (RH) of 60 percent.

Was this information helpful? Yes No

Need more help? Contact Technical Support

Ask a Question